View Relay "Unnamed"
Family: 1 relay | AS45102 | United States of America | Linux
- Consensus
- In Consensus (9/9 Directory Auths)
- BW Verified
- 5/6 BW Auths Measured 408 bit/s Median
- Stability
- Overloaded | UP 1w 1d 13h ago | UP 100% (1M)
- Reachability
- IPv4: 9/9 (Directory Auths)
- First Seen
- 2mo 2d 12h ago
- BW Weight
- 0.00% of Network | 808 Kbit/s Observed By Relay
- Version
- 0.4.8.21 Recommended
Issues Detected:
-
Guard: bandwidth below threshold
: Observed bandwidth 0.1 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM. -
Guard: requires Fast flag
: Guard flag requires having the Fast flag first
Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily. -
High consensus weight deviation
: Large variation in Consensus Weight values across authorities (see 'Cons Wt' column in Per-Authority Details below)
Suggestion: Consensus weight measurements vary significantly between authorities. This can affect traffic distribution. Ensure stable network connection and consistent bandwidth availability. -
Write Bandwidth Limit Hit
: Write rate limit (819 Kbit/s) was hit 3,739 times. Relay is throttling outbound traffic.
Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more upload capacity. -
Read Bandwidth Limit Hit
: Read rate limit (819 Kbit/s) was hit 1,196 times. Relay is throttling inbound traffic.
Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more download capacity.
Notes:
- Rate Limit Configuration: Configured limits: Rate=819 Kbit/s, Burst=1 Mbit/s. Limits hit: Write=3,739, Read=1,196.
Addresses
- OR Address
- 147.139.188.170:9001
Reachability (Directory Authorities)
- IPv4
- 9/9
Location
- Country
-
United States of America
- Interactive Map
- View on Interactive Map
Eligible Flags (4):
Running: 9/9 | Valid: 9/9 | V2Dir: 9/9 | Fast: 0/9 | Stable: 9/9 | HSDir: 0/9 | Guard: 0/9 (need ≥5/9 for flag)
Eligibility Flag Vote Details
| Flag | Metric | Status | Relay Value | Threshold Required |
|---|---|---|---|---|
| Fast | Speed | Meets (≥100 KB/s) | 809.0 Kbit/s (R) | ≥800.0 Kbit/s (guarantee) OR top 7/8 [Stricter] moria1: ≥8.4 Mbit/s |
| Stable | MTBF | Partial (5/9) | Median: 61.9d (6/9 DA above threshold) Min/Max: 10.3d / 62.5d (9/9 DA, Voting / Total Eligible) |
≥22.0d - 54.0d (varies) [Stricter] moria1: ≥405.5d |
| Uptime | Below | 8.6d (R) | ≥9.7d - 10.1d (varies) | |
| HSDir | Prereq: Stable | Meets | 9/9 authorities assigned Stable flag | ≥5/9 authorities |
| Prereq: Fast | Below | 0/9 authorities assigned Fast flag | ≥5/9 authorities | |
| WFU | Meets | Majority: 100.0% (6/9 DA) Min/Med/Max: 99.7% / 100.0% / 100.0% (9/9 DA, Voting / Total Eligible) |
≥98.0% | |
| Time Known | Meets | Median: 61.6d (9/9 DA above threshold) Min/Max: 9.9d / 62.5d (9/9 DA, Voting / Total Eligible) |
≥1.0d (most) [Stricter] moria1: ≥9.9d |
|
| Guard | Prereq: Fast | Below | 0/9 authorities assigned Fast flag | ≥5/9 authorities |
| Prereq: Stable | Meets | 9/9 authorities assigned Stable flag | ≥5/9 authorities | |
| Prereq: V2Dir | Meets | 9/9 authorities assigned V2Dir flag | ≥5/9 authorities | |
| WFU | Meets | Majority: 100.0% (6/9 DA) Min/Med/Max: 99.7% / 100.0% / 100.0% (9/9 DA, Voting / Total Eligible) |
≥98% (all authorities) | |
| Time Known | Meets | Median: 61.6d (9/9 DA above threshold) Min/Max: 9.9d / 62.5d (9/9 DA, Voting / Total Eligible) |
≥8 days (all authorities) | |
| Bandwidth | Below | 809.0 Kbit/s (R) | ≥16.0 Mbit/s OR ≥80.0 Mbit/s-312.0 Mbit/s |
(DA) = Dir. Auth. Measured |
(R) = Relay Reported
Data from Tor CollecTor (authority votes, fetched 2026-01-29 14:45:07).
Last fetch was at Thu, 29 Jan 2026 15:15:39 GMT.
- Unnamed
-
E8130A83E3B3D53A88BD700D912F00D5524957FB - none
- none
-
reject: 1-65535
-
none
-
reject *:*
-
E8130A83E3B3D53A88BD700D912F00D5524957FB
-
none
-
none
- 808.96 Kbit/s | 808.96 Kbit/s| 819.20 Kbit/s| 1.05 Mbit/s Measured
- 0.00% | N/A | 0.00% | N/A
- 147.139.188.170:9001
- none
- none
-
United States of America
- View on Interactive Map
- AS45102 | Alibaba (US) Technology Co., Ltd. (BGP.tools)
-
Running
Stable
V2Dir
Valid
- Match Overall Uptime (100.0%/100.0%/0.0%/0.0%)
- 100.0%/100.0%/0.0%/0.0%
- UP 1w 1d 13h ago
- 2mo 2d 12h ago (2025-11-28 03:00:00) | 1h 17m 16s ago (2026-01-29 14:00:00)
- 1w 1d 13h ago (2026-01-21 01:26:08)
- 2025-11-28 03:00:00
- No
- Linux | Tor 0.4.8.21 on Linux
- 0.4.8.21 | Yes | recommended
Data from Tor CollecTor (authority votes, fetched 2026-01-29 14:45:07).
- Consensus Status (need ≥5/9): In Consensus — 9/9 authorities voted.
- Flag Eligibility (need ≥5/9 for flag): Running: 9/9 | Valid: 9/9 | V2Dir: 9/9 | Fast: 0/9 | Stable: 9/9 | HSDir: 0/9 | Guard: 0/9
- Reachability: IPv4: 9/9
- Consensus Weight (Dir. Auth.): Median: 408 bit/s | Min: 120 bit/s | Max: 808 bit/s [Warning] High deviation
- Identified Issues:
-
Guard: bandwidth below threshold: Observed bandwidth 0.1 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
- Suggestion: Guard requires ≥2 MB/s bandwidth OR being in top 25% of network. To increase bandwidth: 1) Ensure adequate upstream capacity, 2) Check RelayBandwidthRate/RelayBandwidthBurst in torrc, 3) Monitor with Nyx or ARM.
-
Guard: requires Fast flag: Guard flag requires having the Fast flag first
- Suggestion: Get Fast flag by having bandwidth ≥100 KB/s OR in top 7/8ths of network. Most relays get this easily.
-
High consensus weight deviation: Large variation in Consensus Weight values across authorities (see 'Cons Wt' column in Per-Authority Details below)
- Suggestion: Consensus weight measurements vary significantly between authorities. This can affect traffic distribution. Ensure stable network connection and consistent bandwidth availability.
-
Write Bandwidth Limit Hit: Write rate limit (819 Kbit/s) was hit 3,739 times. Relay is throttling outbound traffic.
- Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more upload capacity.
-
Read Bandwidth Limit Hit: Read rate limit (819 Kbit/s) was hit 1,196 times. Relay is throttling inbound traffic.
- Suggestion: Increase RelayBandwidthRate and RelayBandwidthBurst in torrc if your connection has more download capacity.
-
Guard: bandwidth below threshold: Observed bandwidth 0.1 MB/s is below 2 MB/s minimum (AuthDirGuardBWGuarantee)
- Notes:
- Rate Limit Configuration: Configured limits: Rate=819 Kbit/s, Burst=1 Mbit/s. Limits hit: Write=3,739, Read=1,196.
Green = meets threshold, Red = below threshold, Yellow = partial.
| Metric | Dir Auth Measured | Dir Auth Threshold | Status |
|---|---|---|---|
| In Consensus (Dir. Auth.) | 9/9 authorities | ≥5/9 (majority) | IN CONSENSUS |
| Running (IPv4 Reachable) | 9/9 authorities reached this relay | ≥5/9 (majority) | RUNNING |
| Valid | 9/9 (Running + Valid Descriptor) | ≥5/9 (majority) | VALID |
| Consensus Weight (Dir. Auth.) | 408 bit/s (median) | N/A (no threshold, used for path selection) | — |
| Guard WFU (Dir. Auth., guard-wfu) | 100.0% | ≥98% (all authorities) | MEETS |
| Guard TK (Dir. Auth., tk) | 61.6 days | ≥8 days (all authorities) | MEETS |
| Guard BW (Relay Reported) | 809.0 Kbit/s | ≥16.0 Mbit/s OR ≥80.0 Mbit/s-312.0 Mbit/s | BELOW - need ≥2 MB/s |
| Stable Uptime (Relay Reported) | 8.6d | ≥9.7d - 10.1d (typical) | BELOW - 0/9 |
| Stable MTBF (Dir. Auth., mtbf) | 62 days |
≥22.0d - 54.0d (typical)
[Stricter] moria1: ≥405.5d |
PARTIAL - 5/9 |
| Fast Speed (Relay Reported) | 809.0 Kbit/s |
≥800.0 Kbit/s (guarantee) OR ≥816.0 Kbit/s (typical)
[Stricter] moria1: ≥8.4 Mbit/s |
MEETS - ≥100 KB/s guarantee |
| HSDir WFU (Dir. Auth., wfu) | 100.0% | ≥98.0% (from all auths) | BELOW - 0/9 |
| HSDir TK (Dir. Auth., tk) | 61.6 days |
≥1.0d (8/9 auths)
[Stricter] moria1: ≥9.9d |
BELOW - 0/9 |
Each cell shows: your measured value | authority threshold. Green = meets, red = below. Flags: green = all authorities agree, yellow = partial.
| Authority | Running | Valid | BW Scan (Authority) | v4 | Flags | Fast (Relay|T) | Guard BW (Relay|Threshold) | Guard WFU (M|T) | Guard TK (M|T) | Stable MTBF (M|T) | Stable Uptime (Relay|T) | HSDir WFU (M|T) | HSDir TK (M|T) | Desc Published | Cons Wt (Authority) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| bastet (US) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 232.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 62.0d | 8d | 62.0d | 49.8d | 8.6d | 10.6d | 100.0% | 98.0% | 62.0d | 1.0d | 2026-01-29 02:30:14 | 408 bit/s |
| dannenberg (DE) | Yes | Yes | N | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 99.7% | 98% | 23.6d | 8d | 10.3d | 22.0d | 8.6d | 10.1d | 99.7% | 98.0% | 23.6d | 1.0d | 2026-01-29 02:30:14 | 808 bit/s |
| dizum (NL) | Yes | Yes | N | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 21.9d | 8d | 17.6d | 34.6d | 8.6d | 10.1d | 100.0% | 98.0% | 21.9d | 1.0d | 2026-01-29 02:30:14 | 808 bit/s |
| faravahar (US) | Yes | Yes | N | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 61.9d | 8d | 61.9d | 47.5d | 8.6d | 9.7d | 100.0% | 98.0% | 61.9d | 1.0d | 2026-01-29 02:30:14 | 808 bit/s |
| gabelmoo (DE) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 304.0 Mbit/s OR 16.0 Mbit/s | 99.9% | 98% | 32.9d | 8d | 22.5d | 54.0d | 8.6d | 10.1d | 99.9% | 98.0% | 32.9d | 1.0d | 2026-01-29 02:30:14 | 144 bit/s |
| longclaw (US) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 80.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 61.6d | 8d | 61.6d | 54.8d | 8.6d | 9.9d | 100.0% | 98.0% | 61.6d | 1.0d | 2026-01-29 02:30:14 | 808 bit/s |
| maatuska (SE) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 312.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 62.5d | 8d | 62.5d | 54.4d | 8.6d | 9.8d | 100.0% | 98.0% | 62.5d | 1.0d | 2026-01-29 02:30:14 | 136 bit/s |
| moria1 (US) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 8.4 Mbit/s | 809.0 Kbit/s | 240.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 9.9d | 8d | 62.5d | 405.5d | 8.6d | 10.1d | 100.0% | 98.0% | 9.9d | 9.9d | 2026-01-29 02:30:14 | 408 bit/s |
| tor26 (AT) | Yes | Yes | Y | Yes | Running, Valid, V2Dir, Stable | 809.0 Kbit/s | 816.0 Kbit/s | 809.0 Kbit/s | 288.0 Mbit/s OR 16.0 Mbit/s | 100.0% | 98% | 62.5d | 8d | 62.5d | 55.9d | 8.6d | 11.1d | 100.0% | 98.0% | 62.5d | 1.0d | 2026-01-29 02:30:14 | 120 bit/s |
— = not tested/available • Format: relay value | authority threshold • WFU = Weighted Fractional Uptime • TK = Time Known
Bandwidth Values Explained:
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Relay Reported = Your relay's self-reported bandwidth from its descriptor (observed_bandwidth). Used for flag eligibility (Guard, Fast).
Authority Measured = Bandwidth measured by authority's sbws scanner. Used for consensus weight (path selection probability).
Why different? Authorities verify your reported bandwidth independently. 6 of 9 authorities run bandwidth scanners; 3 use relay-reported values directly.
Stable Uptime (Two Data Sources):
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.
Relay Uptime = From Onionoo API (last_restarted field). This is your relay's self-reported uptime from its descriptor. Same value for all authorities.
Authority Threshold = From CollecTor vote files (flag-thresholds stable-uptime). Each authority may have different thresholds.
Why two sources? Vote files contain authority thresholds but not per-relay uptime values. Onionoo aggregates relay descriptors which include uptime.